PRODUCTS | OVERVIEW

Customer Care welcomes you


C TYPE SAFETYCHUCKS | BASIC CHARACTERISTICS




+ Standard safetychuck without inserts (see: parts inserts)
+ Priceworthy basic product for simple and robust performances
+ Available in Flanged or Stationary design, both with or without shaft-end for motor/brake
+ Available in different sizes, series 14-20 (150 Kgs.) up to 40-50 (2800 Kgs.)
+ Replaceable spareparts available

- After wear, complete chuck needs to be replaced
- No options installable after installation

go to product page ... Please consult customer support here

VT TYPE SAFETYCHUCKS | BASIC CHARACTERISTICS




+ VT safetychuck with inserts
+ Priceworthy basic product for simple and robust performances
+ Available in Flanged or Stationary design, both with or without shaft-end for motor/brake
+ Available in different sizes, series 22-30 (800 Kgs.) up to 170-230 (64000 Kgs.)
+ Replaceable wearingparts (inserts) (see: parts inserts)
+ Replaceable spareparts available

go to product page ... Please consult customer support here

SLIDING SAFETYCHUCKS | BASIC CHARACTERISTICS




+ Sliding safetychuck with inserts (see: parts inserts)
+ Available in Flanged or Stationary design, both with or without shaft-end for motor/brake
+ Available in different sizes, series 22-30 (800 Kgs.) up to 40-50 (2800 Kgs.)
+ Available with slide-distance 50 or 100 mm.
+ Replaceable wearingparts (inserts) (see: parts inserts)
+ Replaceable spareparts available

go to product page ... Please consult customer support here

PNEUMATIC ACTUATED SAFETYCHUCKS | BASIC CHARACTERISTICS




+ Pneumatic safetychuck with inserts (see: parts inserts)
+ Available in 2 sizes, P40 & P50 resp. 1600/2800 Kgs.
+ Replaceable wearingparts (inserts) (see: parts inserts)
+ Replaceable spareparts available

go to product page ... Please consult customer support here

AUTOMATED SAFETYCHUCKS | BASIC CHARACTERISTICS




+ Pneumatic safetychuck with inserts (see: parts inserts)
+ Available in 3 sizes, A40/A50/A80 resp. 1600/2800/7000 Kgs.
+ Available in Flanged or Stationary design, both with or without shaft-end for motor/brake
+ Replaceable wearingparts (inserts) (see: parts inserts)
+ Replaceable spareparts available

go to product page ... Please consult customer support here

TENSION CONTROL | BASIC CHARACTERISTICS




  • + Available in 1 roll, twin roll or sensitive version.
    + Quick and simple installation, mounted with 4 bolts on the machine frame.
  • + 230v AC power source required.
  • + 6 bar continuous air supply required using the 6mm. quick connect air connection.
  • + Sensor equipped (Ultra Sonic sensor included).
  • + High speed operations possible.
go to product page ... or consult customer support here

BRAKES & CLUTCHES | BASIC CHARACTERISTICS




+ Brakes suitable for usage with safetychucks equipped with ESB, DSB or MULTI brake system.
+ Brake torques from 30Nm up to 1200Nm.
+ Available in manual operated design and pneumatic operated design.

Spares available at safetychucks.eu/parts

Visit the BRAKES product page, or the CLUTCHES product page. Please consult customer support here

SLIDING BLOCKS | BASIC CHARACTERISTICS




+ Available in axial and radial design.
+ Available as active (operated) and passive (slave) slide.
+ Available in small (25mm.) and large (50mm.) slide.
+ Manually or motorized version.

go to product page ... Please consult customer support here

WINDING CONES | BASIC CHARACTERISTICS




Our high-quality casted aluminum reel-cones are available for round or square (expanding) shafts. The reelcones are serrated and useful for most (core) based converting applications. Models available for core inner-diameters between 50mm. and 330mm. Inner-diameters available upto 80mm.

For all models, please click the popup datasheet.

go to product page ... Please consult customer support here